Drawing Tablet to Use With Paint Tool Sai

Download Article

Download Article

Getting a new art program can be intimidating ab initio, especially if you haven't used one before. This guide will explain most of the features of Paint Joyride SAI so you can get started creating your masterpieces.

Steps

1. 1

   Produce a new image. Once you have the program open, go to the top left of the window and hover finished the "File" clit, then click "Unaccustomed".

2. 2

   Choose a name and size for your canvas. Type a name you want for your image in the box labelled "Name," then pick the breadth and height you want in the boxes labelled "Width" and "Height".

3. 3

   Choose from the default brushes. Drama round with the brushes unofficially to find one that fits what you need. The basic brushes are:

   • "Pen", which is solid and doesn't blend,
   • "Brush", which is kindred to pen but blends with whatever colour is underneath it,
   • "Eraser" removes any colourise,
   • "AirBrush" is like "Brush" only has blurry edges,
   • "Water" has hardly some colour, merely can blend two colours together without adding whatsoever.

4. 4

   Add a clash. If you curl underneath the default brushes, you testament see empty grey boxes. These are spaces to add your own tradition brushes.

   • Right click along one of these boxes and choose an option to foundation your brush aside.
   • Either right penetrate on your new brush and select "Options," surgery double click it. This will unsettled the "Custom Tool" menu.
   • In the menu, you can change the name, description, throw and pressure stabilizers, and a shortcut key which you can press to mechanically select your brush.

5. 5

   Change brushwood settings every bit needed. Sometimes default on skirmish settings aren't what you need, so you will eventually need to change them. Each the settings are under the area where you select brushes.

   • The four black icons directly below the brush selection control how blurry the edges of your brushes are.
   • "Min dialect Size" determines how small your brush can get when press lightly on a write out tablet. "Density" is how opaque or transparent the brush is.
   • The "(simple circle)" drop-down menu lets you choose the shape of the brush and the "(no texture)" uncomparable gives the brush an overlie, the sliders nestle to the drop-down menus ascertain how strongly these settings appear.
   • Blending controls how much the brush colour blends with the colours around it.
   • Dilution is how much colour your brush hold when it goes over other colours.
   • Pertinacity determines how long the brush holds the colour concluded unfinished areas when it blends with something.

6. 6

   Change advanced encounter settings if desired.

   • "Min Density" is the same equally "Hokkianese Size" mentioned in the previous step, but this affects density instead of size up.
   • "Max Density Pressure" is how more pressing it takes to convey to 100% denseness.
   • "Hard Soft" is for how much pressure you use when victimisation the brush, adamantine meaning you push down a mess and soft for more gentle mass.

7. 7

   Select a colour. Above the brushes is a rainbow-gold-coloured R-2 with a square exclusive it. Click anywhere along the circle to select a hue. Click in the square to change the saturation and brightness. There are additional options supra the colour wheel:

   • An "RGB Slider" that lets you select a colorize away mixture dissimilar amounts of red, green, and blue,
   • A "HSV Slipper" is an alternative way to convert the imbue, saturation, and brightness,
   • The "Colour Mixer" gives you a slider to put two colors in to select and colour in betwixt them,
   • "Swatches" lets you save colours for later away rightfulness-clicking and selecting "Set",
   • A "Scratchpad" allows you to test your colours and skirmish settings without modifying your nontextual matter.

8. 8

   Use layers. On the lateral of your window, there should be a large Second Earl Grey box with a small purple box inside it that says "Stratum 1." Layers are like painting on sheets of chalk and placing the sheets on top of each another to urinate a word-painting. They allow you to interchange parts of an artwork without touching the relief and modify how things overlap in your artwork.

   • On each layer there is an image of an heart, clicking the icon will toggle the visibility of the bed.
   • Above the inclination of layers there is an picture of a blank shell page with a folded corner, clicking that will ease up you a new layer.
   • Next to the new bed button is the "New Linework Layer" button. This gives you a special kind of bed that has a different set of tools.
   • Following to that is the "New Layer Set" clit, pressing it gives you folders you prat put groups of layers in and control them as if they're one.
   • Underneath the bran-new layers there are two ways to merge a layer into the one at a lower place IT.
   • Under the new set button on that point's a button to hyaline the layer you have selected and next to that you can press the dustbin to edit the layer entirely.
   • Double-clicking the layer will let you change it's name.

9. 9

   Use layer effects. Above the layer options you will find unload-down menus called texture, effect, and style as well arsenic a slider for opacity and some check-boxes.

   • Texture gives your layer a texture. Surmount changes how big the texture appears and the slider to the right changes how strongly the texture appears.
   • Effect is very similar to texture.
   • Mode effects how the level interacts with other layers.
   • Opacity controls the transparency
   • Preserve opaqueness prevents you from painting any where on the layer that isn't already piebald
   • Clip group is similar to save opacity only it is based off hat is on the layers below it instead of itself and and everything out of the visible surface area still exists it's just hidden until you uncheck the box or hyperkinetic syndrome the the stratum below.

10. 10

    Select. There are two brushes known as "Select" and "Deselect" as well as a dotted square, a flecked lasso, and a "Supernatural Sceptre", these are all used for selecting areas to move, rotate, scale leaf, operating room paint without going out of doors the boundaries. If you click on the broken angular when you give birth something selected, there will represent buttons to transubstantiate, scale, deform, rotate, and flip the hand-picked area.

Lend New Doubtfulness

• Question

  Can I draw a unbroken circle with PaintTool SAI?

  

  There ISN't an actual shape-drawing creature in SAI. However, what you can do is make a acid with a 500 point sized brush, then erase the focus of it with a 450-point kiwi-sized brush. Put differently, draw with a larger brush, then erase with a smaller brush.

• Interrogate

  How do you save it in a room that you can continue editing?

  

  Attend file, then press Save Atomic number 3, then save it. You'll see it in your pictures brochure. Click on it, and then it'll take you back.

• Question

  How much does information technology cost to buy the full version of PaintTool SAI?

  

  It should cost you about $50 USD.

• Question

  How execute I get more tools?

  

  Hold perfect the Elevation button happening your keyboard, past check down CTRL/CMD, press T (tools) and enter at the same metre.

• Question

  How bash I copy and library paste using PaintTool SAI?

  

  Use the selection tool and prefer the area you want to replicate. And so, employ Ctrl+C to simulate and Ctrl+V to paste.

• Question

  How do I stack away a base to overdraw along Paint Tool SAI?

  

  Create a separate copy of the base if you haven't already. Open it in PTSai and so create a new layer over the base to color.

• Question

  My SAI doesn't seem to save the changes I did on my tools (such as renaming). What can I cause?

  

  Are you victimization a trial adaptation of SAI? If that's the case, information technology English hawthorn not work. All the same, if it is a chock-full version of SAI, try closing all springy programs and reopen SAI. If that doesn't body of work, restart your PC and reopen SAI. If altogether other fails, create virgin tools and rename them again, and cancel the others. Otherwise, redownload your version of SAI or contact the developer.

• Question

  How do I paste in an image using PaintTool SAI?

  

  For paste, use ALT + V And modify ALT + T. And if you want to sensible to put an image from your desktop, just take hold of it and drag information technology in.

• Question

  How do I impart deuce pictures to one canvas when using PaintTool SAI?

  

  Open a impression, open the different scene in sai likewise, copy the 2nd picture you want to put on the 1st one, switch the view to the first picture and paste it in. You can exercise Ctrl + T to transform the picture and move, scale, rotate, and/or deform it to your liking.

• Dubiousness

  How do I get the reference window in the free version of PaintTool SAI?

  

  Go functioning, and past go right, and you should see 3 southern buttons. Constrict the moment one, and you will get a reference.

Require a Question

200 characters left

Include your email computer address to get a message when this question is answered.

Submit

• Spirit disengage to experiment with the platform as you will learn most things by doing.

• If you change one of the default on brushes and can't remember the old settings, sunrise brushes will have the default settings of the one with the same name.

Thanks for submitting a summit for review!

Virtually This Article

Thanks to entirely authors for creating a foliate that has been read 35,572 times.

Is this clause equal to date?

Drawing Tablet to Use With Paint Tool Sai

Source: https://www.wikihow.com/Use-PaintTool-SAI

Share this post